Basic Info.
Nature of Source Flow
Power Inverter
Certification
CCC, ISO9001, CE
Grid Type
off-Grid Inverter
Nature of Wave String
Sine Wave Inverter
Output Current
10AMP-90AMP
Transport Package
Cartons and Wooden Crate
Specification
550*520*310mm
Product Description
_______________________________________________________________________________
Features
Smart Remote ControlSupport Solar Panel with MPPT Fuction Designed to Operate under Harsh EnviromentDC Start & Automatic Self-Diagnostic FunctionCompatiable with Both Linear & Non-Linear LoadEasy to Install & Easy to Operate & Easy to solveLow DC Voltage Supports Home & Office AppliancesPowerful Charge Rate Up to 120Amp,Selectable From 0%-100%High Efficiency Design & "Power Saving Mode" to Conserve EnergyBattery Priority Mode,Designates the Inverter-Perferred UPS Configuaration13 Vdc Battery Recover Point,Dedicated for Renewable Energy Systems4-step Intelligent Battery Charging,PFC (Power Factor Correction) for Charger8 ms Typical Transfer Time Between Utility & Battery,Guarantees Power Continuity15s Delay Before Transfer when AC Resumes,Protection for Load when Used with Generator
On the DC end of inverter, there are 5 DIP switches which enable users to customize the performance of the device.
Switch No | Switch Function | Position:0 | Position:0 |
SW1 | Low Battery Trip Volt | 10.0VDC For Deep-Cycle Battery | 10.5VDC For Starting Battery |
*2 for 24Vdc,*for 48Vdc |
SW2 | AC Input Range/(AVR) | AC Source | For Utility Mode | For Generator Mode |
230Vac HV | 184-253Vac(176-276vAC) | 154-253Vac/(150-276Vac) |
120Vac LV | 100-135Vac/(92-144Vac) | 90-153Vac/(78-144Vac) |
SW3 | Power Saver Auto Setting | Night Charger Function | Detect Load Per 35Secs |
SW4 | O/P Frequency Setting | 50Hz | 60Hz |
SW5 | Solar / AC Priority Setting | Utility Priority | Battery Priority |
Low Battery Trip Volt:
The Low Battery Trip Volt is set at 10.0 VDC by default.It can be customized to 10.5VDC
AC Input Range:
There are different acceptable AC input ranges for different kinds of loads.It can be customized from 184-253VAC to 154-253VAC.
Load Sensing Cycle:
The inverter is factory defaulted to detect load for 250ms in every 30 seconds.This cycle can be customized to 3 seconds thru the SW3 on DIP switch.
Frequency adjust:
The frequency of the inverter is arranged by the Sw4.
The factory default configuration for 220/230/240VAC inverter is 05Hz,and 60Hz for 100/110/120VAC inverter.While the output freq can be easily changed once a qualified freq is applied to the inverter.
Solar/AC Priority Setting:
Our inverter is designed AC priority by default.This means,when AC input is present,the battery will be charged first,and the inverter will transfer the input AC to power the load.
The AC Priority and Battery Priority switch is available upon request.When you choose battery pirority,the inverter will inverting from battery despite the AC input.
HP Pure Sine Wave Inverter/Charger | | |
Inverter Output | Model | 1.0KW | 1.5KW | 2.0KW | 3.0KW | 4.0KW | 5.0KW | 6.0KW | 8.0KW | 10.0KW | 12.0KW | |
Continuous Output Power | 1.0KW | 1.5KW | 2.0KW | 3.0KW | 4.0KW | 5.0KW | 6.0KW | 8.0KW | 10.0KW | 12.0KW | |
Surge Rating (20Secs) | 3.0KW | 4.5KW | 6.0KW | 9.0KW | 12.0KW | 15.0KW | 18.0KW | 24.0KW | 30.0KW | 36.0KW | |
Output Waveform | Pure Sine wave/Same as input(Bypass Mode) | |
Nominal Efficiency | >88%(Peak) | |
Line Mode Efficiency | >95% | |
Power Factor | 0.9-1.0 | |
Nominal Output Voltage rms | 100-110-120Vac / 220-230-240Vac | |
Output Voltage Regulation | ±10% RMS | |
Output Frequency | 50Hz ± 0.3Hz/60Hz ± 0.3Hz | |
Short Circuit Protection | Yes( 1sec after fault ) | |
Typical transfer Time | 10ms(Max) | |
THD | < 10% | |
DC Input | Nominal Input Voltage | 12.0Vdc/24.0Vdc/48.0Vdc | 24.0Vdc/48.0Vdc | 48.0Vdc | |
Minimum Start Voltage | 10.0Vdc/ 10.5Vdc for 12Vdc Mode | *2 for 24Vdc, *4 for 48Vdc ; | |
Low Battery Alarm | 10.5Vdc/ 11.0Vdc for 12Vdc Mode |
Low Battery Trip | 10.0Vdc/ 10.5Vdc for 12Vdc Mode |
High Voltage Alarm | 16.0Vdc for 12Vdc Mode |
Low Battery Voltage Recover | 15.5Vdc for 12Vdc Mode |
Idle Consumption-Search Mode | < 25 W when Power Saver On. | |
Charger | Output Voltage | Depends on battery type | |
Charger Breaker Rating | 20A | 20A | 20A | 25A | 32A | 40A | 40A | 50A | 80A | 80A | |
Max Charge Power Rate | 1/3 Rating Power | |
Battery Initial Voltage for Start | 10-15.7Vdc for 12Vdc Mode | *2 for 24Vdc, *4 for 48Vdc ; | |
Over Charge Protection Shutdown | 15.7Vdc for 12Vdc Mode |
BTS | Battery Temperature Sensor (Optional) | Yes(Refer to the table) Variances in Charging Voltage & S.D Voltage Based on the Battery Temperature. | |
Bypass & Protection | Input Voltage Waveform | Sine wave (Grid or Generator) | |
Nominal Voltage | 100-110-120Vac / 220-230-240Vac | |
Max Input AC Voltage | 150VAC For 120Vac LV Mode; 300VAC For 230Vac HV Mode; | |
Nominal Input Frequency | 50Hz or 60Hz (Auto detect) | |
Low Freq Trip | 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz | |
High Freq Trip | 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz | |
Overload protection (SMPS load) | Circuit Breaker | |
Output Short circuit protection | Circuit Breaker | |
Bypass Breaker Rating | 20A | 20A | 20A | 25A | 32A | 40A | 40A | 50A | 80A | 80A | |
Transfer switch Rating | 30Amp for UL & TUV | 40Amp for UL | 80Amp for UL | |
Bypass Without Battery Connected | Yes (Optional) | |
Max Bypass Current | 30Amp | 40Amp | 80Amp | |
Solar Charger (Optional) | Rated Voltage | 12Vdc / 24Vdc / 48Vdc | |
Solar Input Voltage Range | 15-45Vdc / 30-70Vdc / 60-100Vdc | |
Rated Charge Current | 40 or 60A | |
Rated Output Current | 15A | |
Self Consumption | < 10mA | |
Bulk Charge (Default) | 14.5Vdc for 12Vdc Mode | *2 for 24Vdc, *4 for 48Vdc | |
Floating Charge(Default) | 13.5Vdc for 12Vdc Mode |
Equalization Charge(Default) | 14.0Vdc for 12Vdc Mode |
Over Charge Disconnection | 14.8Vdc for 12Vdc Mode |
Over Charge Recovery | 13.6Vdc for 12Vdc Mode |
Over Discharge Disconnection | 10.8Vdc for 12Vdc Mode |
Over Discharge Reconnection | 12.3Vdc for 12Vdc Mode |
Temperature Compensation | -13.2mV/°C for 12Vdc Mode |
Ambient Temperature | 0 ~ 40°C(Full load) 40 ~ 60°C(Derating) | |
Mechanical Specifications | Mounting | Wall Mount | |
Inverter Dimensions(L*W*H) | 388*415*200mm | 488*415*200mm | 588*415*200mm | |
Inverter Weight (Solar Chg)KG | 21+2.5 | 22+2.5 | 23+2.5 | 27+2.5 | 38+2.5 | 48+2.5 | 49+2.5 | 60+2.5 | 66+2.5 | 70+2.5 | |
Shipping Dimensions (L*W*H) | 550*520*310mm | 650*520*310mm | 750*520*310mm | |
Shipping Weight (Solar Chg)KG | 23+2.5 | 24+2.5 | 25+2.5 | 29+2.5 | 40+2.5 | 50+2.5 | 51+2.5 | 62+2.5 | 68+2.5 | 72+2.5 | |
Display | Status LEDs / Status LEDs+LCD | |
Standard Warranty | 1 Year | |
Address:
4th Floor, No. 281#18th Road, Yueqing Economic Developing Zone, Yueqing, Wenzhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Electrical & Electronics
Management System Certification:
ISO 9001
Company Introduction:
Integrating research & development, production and marketing, Yiyuan Electric Co., Ltd. is an enterprise specializing in manufacturing power supplies and bearings. Our company has a workshop covering more than 4000 square meters. We have more than 200 employees, including more than 20 experienced technicians. At the same time, we have introduced advanced technology from home and abroad positively, improved and refined our products continuously. Years of specialized production has made our products salable in the world market, like Russia, Southeast Asia, Europe, America, the Middle East and Africa.
With extensive usage of information and micro-electronic technology, higher quality requirements of current supply have been put forward by a large quantity of electricity-consuming equipments. In view of this situation, we have explored series of power supply products to meet the requirements of all kinds of special electricity-consuming equipment. Our main products are voltage stabilizers, voltage regulators, inverters, silicon rectifying chargers, low voltage apparatus, reactors, current transformers, voltage transformers and circuit breakers.
We have passed Quality Management System of ISO9001 and possessed variety of advanced production equipment as well as refined inspection apparatus. We have attained many quality certifications like CE and others by our strict quality management and perfect after-sale service system.
"Science and technology promote business powerful, while brand make it flourishing" is our management idea, and "building good image for customers at home and abroad" is our responsibility. We′ll dedicate ourselves to serving consumers, the society and workers so as to realize mutual benefits. We promise to help you at any time, because "honesty and service are our source of persistent existence and development". We′ll devote ourselves to the industrialization of power supplies and bearings. We′ll offer premium service for all customers and consumers with our unique self-created brand "EYEN" with all strength!