Basic Info.
Nature of Source Flow
Power Inverter
Certification
CCC, ISO9001, CE
Grid Type
off-Grid Inverter
Circuit Topologies
Full-Bridge Type
Nature of Wave String
Sine Wave Inverter
Output Current
10AMP-90AMP
Transport Package
Cartons and Wooden Crate
Specification
442*218*179mm
Product Description
_______________________________________________________________________________
Feature of AP Series Inverter&Charger
High overload ability of our AP charger is up to 300% rated power(20 sec)
AP pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W. It can extract max.power from various batteries with different protections, and low voltage trip can be selected (10V/10.5V or 10.5V/11V).
Uses PFC(power factor correction) for charger, which has less power consumption than conventional units.
It has 15s delay before transfer when AC resumes, and overload protection when our AP pure sine wave inverter equips with generator.
10ms typical transfer time between battery and AC, which guarantees power continuity of AP charger. Uses selectable input AC voltage (184-253V or 140-270V) for different kinds of loads.
Our AP charger allows start up and through power with depleted batteries. Its powerful charge rate up to 90Amp.
It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries.
LCD status display, battery/AC priority switch, USB communication port are available for our AP pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.
______________________________________________________________________
On the DC end of inverter, there are 4 DIP switches which enable users to customize the performance of the device.
Switch No | Switch Function | Position:0 | Position:1 |
SW1 | Low Battery Trip Volt | 10.0VDC | 10.5VDC |
SW2 | AC Input Range | 184-253VAC | 154-253VAC |
SW3 | Load Sensing Cycle | 30 seconds | 3 seconds |
SW4 | Battery/AC Priority | Unitity Priority | Battery Priority |
Low Battery Trip Volt:
The Low Battery Trip Volt is set at 10.0 VDC by default.It can be customized to 10.5VDC
AC Input Range:
There are different acceptable AC input ranges for different kinds of loads.
It can be customized from 184-253VAC to 154-253VAC.
Load Sensing Cycle:
The inverter is factory defaulted to detect load for 250ms in every 3 seconds when SW3 setting positionl.
In NIGHT CHARGER position, the inverter will stay in standby mode without sensing loads. It won't output any powereven if a load is turned on when working on battery mode.
AC/Battery Setting:
Our inverter is designed AC priority by default. This means, when AC input is present, the battery will be charged first, and the inverter will transferthe input AC to powerthe load.
The AC Priority and Battery Priority switch is available upon request. When you choose battery priority, the inverter will inverting from battery despite the AC input.
| Model | AP | AP | AP | AP | AP | AP | AP |
1000W | 1500W | 2000W | 3000W | 4000W | 5000W | 6000W |
Inverter Output | Continuous Output Power | 1000W | 1500W | 2000W | 3000W | 4000W | 5000W | 6000W |
Surge Rating(20s) | 3000W | 4500W | 6000W | 9000W | 12000W | 15000W | 18000W |
Capable of Starting Electric Motor | 1HP | 1.5HP | 2HP | 3HP | 4HP | 5HP | 6HP |
Output Waveform | Pure Sine wave/Same as input(Bypass mode) |
Nominal Efficiency | >88%(Peak) |
Line Mode Efficiency | >95% |
Power Factor | 0.9-1.0 |
Nominal Output Voltage rms | 100-110-120Vac / 220-230-240Vac |
Output Voltage Regulation | ±10% RMS |
Output Frequency | 50/60Hz ± 0.3Hz |
Short Circuit Protection | Yes, Current Limit Function (Fault after 1sec) |
Typical transfer Time | 10ms(Max) |
THD | < 10% |
DC Input | Nominal Input Voltage | 12.0Vdc |
( *2 for 24Vdc, *4 for 48Vdc) |
Minimum Start Voltage | 10.0Vdc |
Low Battery Alarm | 10.5Vdc / 11.0Vdc |
Low Battery Trip | 10.0Vdc / 10.5Vdc |
High Voltage Alarm & Fault | 16.0Vdc |
High DC Input Recovery | 15.5Vdc |
Low Battery voltage recover | 13.0Vdc |
Idle Consumption-Search Mode | < 25 W when Power Saver On |
Charge | Input Voltage Range | Wide: 90~135VAC / 164~243VAC; |
Narraw: 100~135VAC / 194~243VAC; |
Output Voltage | Depends on battery type |
Charger Breaker Rating | 10A | 10A | 10A | 20A | 20A | 30A | 30A |
Max Charge Rate | 35A / 70-90A Max (Charger Current Control) |
Over Charge Protection Shutdown | 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc) |
Charger curve(4 stage constant current) | Battery types ( *2 for 24Vdc, *4 for 48Vdc) |
4 step digital controlled progressive charge |
Battery type | Fast Vdc | Float Vdc |
Gel U.S.A | 14 | 13.7 |
A.G.M 1 | 14.1 | 13.4 |
A.G.M 2 | 14.6 | 13.7 |
Sealed Lead Acid | 14.4 | 13.6 |
Gel Euro | 14.4 | 13.8 |
Open Lead Acid | 14.8 | 13.3 |
Calcium | 15.1 | 13.6 |
De-sulphation | 15.5 for 4hrs |
Remote Control | Yes. Optional |
Bypass & Protection | Input Voltage Waveform | Sine wave (Grid or Generator) |
Nominal Voltage | 120Vac | 230Vac |
Low Voltage Trip | 80V/90V±4% | 184V/154V±4% |
Low Voltage re engage | 90V/100V±4% | 194V/164V±4% |
High Voltage Trip | 140V±4% | 253V±4% |
High Voltage re engage | 135V±4% | 243V±4% |
Max Input AC Voltage | 150VAC | 270VAC |
Nominal Input Frequency | 50Hz or 60Hz (Auto detect) |
Low Freq Trip | 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz |
Low Freq re engage | 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz |
High Freq Trip | 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz |
High Freq re engage | 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz |
Output Short circuit protection | Circuit breaker |
Bypass breaker rating | 10A | 15A | 20A | 30A | 30A | 40A | 40A |
Transfer switch rating | 30amp for UL & TUV | 270VAC |
Max bypass current | 30amp | 40amp |
Mechanical Specification | Mounting | Wall mount |
Inverter Dimensions(L*W*H) | 382*218*179mm | 442*218*179mm | 598*218*179mm |
Inverter Weight | 16KG | 17KG | 20KG | 24KG | 35KG | 45KG | 45KG |
Shipping Dimensions(L*W*H) | 520*315*300mm | 580*315*300mm | 740*315*300mm |
Shipping Weight | 18KG | 19KG | 22KG | 26KG | 37KG | 47KG | 47KG |
Display | Status LEDs / Status LEDs+LCD |
Standard Warranty | 1 Year |
Address:
4th Floor, No. 281#18th Road, Yueqing Economic Developing Zone, Yueqing, Wenzhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Electrical & Electronics
Management System Certification:
ISO 9001
Company Introduction:
Integrating research & development, production and marketing, Yiyuan Electric Co., Ltd. is an enterprise specializing in manufacturing power supplies and bearings. Our company has a workshop covering more than 4000 square meters. We have more than 200 employees, including more than 20 experienced technicians. At the same time, we have introduced advanced technology from home and abroad positively, improved and refined our products continuously. Years of specialized production has made our products salable in the world market, like Russia, Southeast Asia, Europe, America, the Middle East and Africa.
With extensive usage of information and micro-electronic technology, higher quality requirements of current supply have been put forward by a large quantity of electricity-consuming equipments. In view of this situation, we have explored series of power supply products to meet the requirements of all kinds of special electricity-consuming equipment. Our main products are voltage stabilizers, voltage regulators, inverters, silicon rectifying chargers, low voltage apparatus, reactors, current transformers, voltage transformers and circuit breakers.
We have passed Quality Management System of ISO9001 and possessed variety of advanced production equipment as well as refined inspection apparatus. We have attained many quality certifications like CE and others by our strict quality management and perfect after-sale service system.
"Science and technology promote business powerful, while brand make it flourishing" is our management idea, and "building good image for customers at home and abroad" is our responsibility. We′ll dedicate ourselves to serving consumers, the society and workers so as to realize mutual benefits. We promise to help you at any time, because "honesty and service are our source of persistent existence and development". We′ll devote ourselves to the industrialization of power supplies and bearings. We′ll offer premium service for all customers and consumers with our unique self-created brand "EYEN" with all strength!