Invertor 10000W High Quality Power Inverter Home UPS
|FOB Price:||US $1,000-1,300 / Piece|
|Min. Order:||2 Pieces|
|Min. Order||FOB Price|
|2 Pieces||US $1,000-1,300/ Piece|
|Production Capacity:||5000 PCS/Month|
|Transport Package:||Cartons and Wooden Pallet|
|Payment Terms:||L/C, T/T, Western Union, Paypal, Money Gram|
- Model NO.: HPV 10KW
- Certification: CCC, ISO9001, CE
- Grid Type: off-Grid Inverter
- Circuit Topologies: Full-Bridge Type
- Type: DC/AC Inverters
- AC Output: 110V/230V
- Frequency: 50Hz/60Hz
- Display: LCD
- Weight: 86kg
- Warranty: 1 Year
- Specification: 550*520*310mm
- HS Code: 8504403090
- Nature of Source Flow: Power Inverter
- Output Power: 1000W
- Output Type: Single
- Nature of Wave String: Sine Wave Inverter
- DC Input: 12V/24V/48V
- Output Current: 10AMP-90AMP
- Thd: <10%
- Color: Orange
- Efficiency: 95%
- Trademark: YIY/OEM
- Origin: China
- Smart Remote Control
- Support Solar Panel with MPPT Fuction
- Designed to Operate under Harsh Enviroment
- DC Start & Automatic Self-Diagnostic Function
- Compatiable with Both Linear & Non-Linear Load
- Easy to Install & Easy to Operate & Easy to solve
- Low DC Voltage Supports Home & Office Appliances
- Powerful Charge Rate Up to 120Amp,Selectable From 0%-100%
- High Efficiency Design & "Power Saving Mode" to Conserve Energy
- Battery Priority Mode,Designates the Inverter-Perferred UPS Configuaration
- 13 Vdc Battery Recover Point,Dedicated for Renewable Energy Systems
- 4-step Intelligent Battery Charging,PFC (Power Factor Correction) for Charger
- 8 ms Typical Transfer Time Between Utility & Battery,Guarantees Power Continuity
- 15s Delay Before Transfer when AC Resumes,Protection for Load when Used with Generator
On the DC end of inverter, there are 5 DIP switches which enable users to customize the performance of the device.
|Switch No||Switch Function||Position:0||Position:0|
|SW1||Low Battery Trip Volt|
For Deep-Cycle Battery
For Starting Battery
|*2 for 24Vdc,*for 48Vdc|
|SW2||AC Input Range/(AVR)|
|For Utility Mode||For Generator Mode|
|SW3||Power Saver Auto Setting||Night Charger Function||Detect Load Per 35Secs|
|SW4||O/P Frequency Setting||50Hz||60Hz|
|SW5||Solar / AC Priority Setting||Utility Priority||Battery Priority|
Low Battery Trip Volt:
The Low Battery Trip Volt is set at 10.0 VDC by default.It can be customized to 10.5VDC
AC Input Range:
There are different acceptable AC input ranges for different kinds of loads.It can be customized from 184-253VAC to 154-253VAC.
Load Sensing Cycle:
The inverter is factory defaulted to detect load for 250ms in every 30 seconds.This cycle can be customized to 3 seconds thru the SW3 on DIP switch.
The frequency of the inverter is arranged by the Sw4.
The factory default configuration for 220/230/240VAC inverter is 05Hz,and 60Hz for 100/110/120VAC inverter.While the output freq can be easily changed once a qualified freq is applied to the inverter.
Solar/AC Priority Setting:
Our inverter is designed AC priority by default.This means,when AC input is present,the battery will be charged first,and the inverter will transfer the input AC to power the load.
The AC Priority and Battery Priority switch is available upon request.When you choose battery pirority,the inverter will inverting from battery despite the AC input.
|HP Pure Sine Wave Inverter/Charger|
|Continuous Output Power||1.0KW||1.5KW||2.0KW||3.0KW||4.0KW||5.0KW||6.0KW||8.0KW||10.0KW||12.0KW|
|Surge Rating (20Secs)||3.0KW||4.5KW||6.0KW||9.0KW||12.0KW||15.0KW||18.0KW||24.0KW||30.0KW||36.0KW|
|Output Waveform||Pure Sine wave/Same as input(Bypass Mode)|
|Line Mode Efficiency||>95%|
|Nominal Output Voltage rms||100-110-120Vac / 220-230-240Vac|
|Output Voltage Regulation||±10% RMS|
|Output Frequency||50Hz ± 0.3Hz/60Hz ± 0.3Hz|
|Short Circuit Protection||Yes( 1sec after fault )|
|Typical transfer Time||10ms(Max)|
|DC Input||Nominal Input Voltage||12.0Vdc/24.0Vdc/48.0Vdc||24.0Vdc/48.0Vdc||48.0Vdc|
|Minimum Start Voltage||10.0Vdc/ 10.5Vdc for 12Vdc Mode||*2 for 24Vdc, *4 for 48Vdc ;|
|Low Battery Alarm||10.5Vdc/ 11.0Vdc for 12Vdc Mode|
|Low Battery Trip||10.0Vdc/ 10.5Vdc for 12Vdc Mode|
|High Voltage Alarm||16.0Vdc for 12Vdc Mode|
|Low Battery Voltage Recover||15.5Vdc for 12Vdc Mode|
|Idle Consumption-Search Mode||< 25 W when Power Saver On.|
|Charger||Output Voltage||Depends on battery type|
|Charger Breaker Rating||20A||20A||20A||25A||32A||40A||40A||50A||80A||80A|
|Max Charge Power Rate||1/3 Rating Power|
|Battery Initial Voltage for Start||10-15.7Vdc for 12Vdc Mode||*2 for 24Vdc, *4 for 48Vdc ;|
|Over Charge Protection Shutdown||15.7Vdc for 12Vdc Mode|
|BTS||Battery Temperature Sensor (Optional)||Yes(Refer to the table)|
Variances in Charging Voltage & S.D Voltage Based on the Battery Temperature.
|Bypass & Protection||Input Voltage Waveform||Sine wave (Grid or Generator)|
|Nominal Voltage||100-110-120Vac / 220-230-240Vac|
|Max Input AC Voltage||150VAC For 120Vac LV Mode; 300VAC For 230Vac HV Mode;|
|Nominal Input Frequency||50Hz or 60Hz (Auto detect)|
|Low Freq Trip||47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz|
|High Freq Trip||55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz|
|Bypass Breaker Rating||20A||20A||20A||25A||32A||40A||40A||50A||80A||80A|
|Transfer switch Rating||30Amp for UL & TUV||40Amp for UL||80Amp for UL|
|Bypass Without Battery Connected||Yes (Optional)|
|Max Bypass Current||30Amp||40Amp||80Amp|
|Solar Charger (Optional)||Rated Voltage||12Vdc / 24Vdc / 48Vdc|
|15-45Vdc / 30-70Vdc / 60-100Vdc|
|Rated Charge Current||40 or 60A|
|Rated Output Current||15A|
|Self Consumption||< 10mA|
|Bulk Charge (Default)||14.5Vdc for 12Vdc Mode||*2 for 24Vdc, *4 for 48Vdc|
|Floating Charge(Default)||13.5Vdc for 12Vdc Mode|
|Equalization Charge(Default)||14.0Vdc for 12Vdc Mode|
|Over Charge Disconnection||14.8Vdc for 12Vdc Mode|
|Over Charge Recovery||13.6Vdc for 12Vdc Mode|
|Over Discharge Disconnection||10.8Vdc for 12Vdc Mode|
|Over Discharge Reconnection||12.3Vdc for 12Vdc Mode|
|Temperature Compensation||-13.2mV/°C for 12Vdc Mode|
|Ambient Temperature||0 ~ 40°C(Full load) 40 ~ 60°C(Derating)|
|Mechanical Specifications||Mounting||Wall Mount|
|Inverter Weight (Solar Chg)KG||21+2.5||22+2.5||23+2.5||27+2.5||38+2.5||48+2.5||49+2.5||60+2.5||66+2.5||70+2.5|
|Shipping Dimensions (L*W*H)||550*520*310mm||650*520*310mm||750*520*310mm|
|Shipping Weight (Solar Chg)KG||23+2.5||24+2.5||25+2.5||29+2.5||40+2.5||50+2.5||51+2.5||62+2.5||68+2.5||72+2.5|
|Display||Status LEDs / Status LEDs+LCD|
|Standard Warranty||1 Year|
1.We have more than 10 years' experience in foreign trade service.
2.YIYEN/YIY would like to provide OEM/ODM Services to customers via the following ways.
Design for special packing
We could provide the packing design service according to customers' instruction and our experience,including design of printed inner box and carton.
So working with YIYEN/YIY ,no need to worry the design.
Products printing and logo OEM
Most of customers want to develop their own printing or put the logo on the products it's no problem for YIYEN/YIY,because we have professional designers working in our factory.
Smaller orders are available
YIYEN/YIY always prepare some stocks for hot selling products, so that meet the purchase requirement of smaller order from customers,because we would liketo help them grow up at the beginning of business.And some customers trial order,in order to keep more and more business each other in future.
3.During the warranty, any defective product will get repaired or replaced for free.
4.We have our own R&D team and Quality Control System which can guarantee the goods with good quality and advanced technology.
5.Don't hesitate to send inquiry to us when you see our products, we will do our best to reply as soon as possible and help you get more profit here.
6.In 2016, the Rate of Punctual Delivery is 98%.
Q 1. what's the payment term?
A. We accept TT,30% deposit and 70% balance agaisnt copy of BL
Q 2. how's the delivery time ?
A. usually it will take about 25 days for production
Q 3. tell me the standard of package?
A. For the small capacity, it use carton, but for big capacity, we should use strong wooden case for protection.
Q 4. what kind of material of transformer?
A. we have two types, one 100% copper and the other is copper with aluminum.It depends on your requirment. In fact,those two have no difference if normal work well. Only except the longlife. Copper is better and also higer price.
Q 5.Could you offer Form A or C/O ?
A. It totally not a problem. We can prepare relative documents to forgin affairs office or other office to apply for this certificate.
Q 6.Would you accept to use our logo ?
A.If you have good quantity,it absolute no problem to do OEM.
Q 7.We want to know month capacity.
A. It depends on which model.For example for relay type small capacity , month capacity can reach near 20000pcs and big capacity near 3000pcs.
Q 8.Where is your market?
A. Our products are popular in russia, indonisia, Philippines,italy, america, pakistan and so on.Some of them are our regular customers and some of them are developing. We hope you can join us and make mutural benifit from our cooperation.
Q 9.Does the inverter connect with solar system ?
A.Yes.Because of the unique feature which combine invert,charge and AC auto-transfer switch into one complete system,made inverter not only connect with solar system,also could be used in& officer equipment,household items,power tools ans etc..
Q10. what kind of certificate you have ?
A. Our company already achieve ISO, CCC, and for products, we have CE, SONCAP, GOST, UL(pending) .